TECNOMAGNETE Virtual stand on DirectIndustry.com

Products -

TECNOMAGNETE

Radial Magnetic chuck

Permanent-electro magnetic chucks for turning operations.
The PR/S model is dedicated to grinding and finishing operations.
PR/H version for heavy turning operation.
No machining vibrations - full machining in a single setup.

More specifications...

Magnetic chuck

The QUADSYSTEM magnetic chucks are the revolutionary proposal of TECNOMAGNETE for all machining operations on milling machines and machining centres.

They get easily installed on any type of machine, they don't overheat and being insensitive to any possible electrical break-down, they are intrinsically safe.
The "electro-permanent" patented technology used requires the electrical feeding only for few seconds to energize and de-energize the magnetic field, then the connection can [...]

More specifications...

Lifting magnet

The manual lifter of the MaxX Tecnomagnete series represent an ideal solution for moving ferrous loads in an economic, rapid and safe way.
RAPID
With the simple motion of a lever, the magnetism lifts, transports and releases the load with extreme rapidity, needing only a single operator. It does not compress or deform the load, rather, it allows plenty of motion even with limited spaces.
SAFE
Once activated, a spring-loaded device blocks the manoeuvring lever, thus preventing [...]

More specifications...

Machining center magnetic chuck

All advantages given by the permanent-electro magnetic chucks combined with the flexibility of a system designed for horizontal spindle machine tools.
With Cubotec it’s easy to fix pieces with different shape and dimension, as well with surfaces bigger than clamping area, using the full strokes of the machine.

Unique characteristics of stability, rigidity and robustness are achieved by the solid block construction made from a solid block of steel.
The subsequent integration [...]

More specifications...

Electro-permanent lifting magnet
< 25 t

They are designed for sheets with thicknesses starting from 4mm.
The model TM4, equipped with 4 permanent-electro cross-beams, is able to lift loads up to 12m lenght and weight up to 20 tons.
The TM6 version, equipped with 6 cross-beams, is able to work with loads up to 16m lenght and 25 tons SWL.

The hydraulic system allows high precision and reliability in time.

The same permanent-electro magnetic technology used in the TM model, but installed on a more [...]

More specifications...

Quick mold change system : Magnetic clamping system

Quad-Press: A magnetically clamped mold is subject to neither deformations nor to inner tensions.
The force is distributed uniformly throughout the contact area, instead of only being applied on the external edges of the base-plate, as it happens when traditional clamping methods are used.
The quality of the molded part is constant in time.

Each 80HC square pole generates a constant, predictable and concentrated force of 1000 kg.
This force improves the performances to [...]

More specifications...

Electro-permanent magnetic chuck

MDS for Spark erosion :
Permanent-electro magnetic chucks for EDM machines.
It's equipped with dedicated washing channels.
Steel/brass surface for high reliability in time.

Cubotec for horizontal milling :
Now with Cubotec all advantages given by Super-Quad chucks are combined with the flexibility of a system designed for horizontal spindle machine tools.
With Cubotec it's easy to fix pieces with different shape and dimension, as well with surfaces bigger than [...]

More specifications...

Permanent magnet magnetic chuck

Super-Quad magnetic chucks are the revolutionary proposal for all machining operations on milling machines and machining centres.
The workpiece is totally free for full machining on 5 faces in a single set-up.
Self-shimming system enables clamping warped-surfaces pieces.

More specifications...

Coil lifting magnet

RD modules for rounds:
Permanent-electro magnetic modules for rounds handling.
The special shape allows to easily clamp loads with curve surfaces.

CO / CV modules for coils handling:
Permanent-electro magnetic modules for coils handling, even in vertical or horizontal eye.
Special equipments for full-automatic lines.

More specifications...

Multi-coupling for quick production change

Tecnomagnete is pleased to introduce the new Manual Multi Coupling line TC.
TC series is compact to make easier the use even with small molds and light machines.
Moreover TC is perfectly compatible and interchangeable with most of the equipments available on the market.

More specifications...

Magnetic lifter

The manual lifters of the MaxX series represent an ideal solution for moving ferrous loads in an economic, rapid and safe way.
They are available in a range between 125kg (275 lbs) to 2000 kg (4400 lbs) capacity. Safety factor 3.

The radio-controlled Bat-Grip lifters are useful to handle loads with a remote control, without power supply connection.
They are feeded by a standard battery, with high capacity.
In fact the electricity is used only during MAG and DEMAG [...]

More specifications...

Electro-permanent lifting magnet
< 3 t

BAT GRIP
3 Ton capacity permanent-electro lifters with battery.
Equipped with a remote control, this lifter is capable to be used for a long period independent of the power supply (est 7

days), because the energy is only used for a fraction of a second during the MAG/DEMAG phase.

More specifications...

Tube lifting magnet

EM modules for bundles
Electromagnetic modules with capacity up to 8 tons.
They allow to clamp bundles or packs of rounds, sections, sheets and other ferrous loads already strapped.

More specifications...

Quick mold change system : magnetic clamping system
< 250 'C

HotMAG
permanent electro magnetic system for quick clamping of high temperature moulds.

The new permanent electro magnetic system HotMag is the final answer to all the needs to make quick change operations on press machines working with high temperature moulds.
The innovative magnetic circuit, made of special solenoids and high energy permanent magnets, allows to
operate with temperature up to 250° C. (482 ‘F).
The full metallic surface allows the perfect stability [...]

More specifications...

Quick mold change system

Magnetic die clamping for stamping presses.
Quad Stamp is easy to install: using bolts to mount magnetic plates to existing T-slots or tapped holes.
Its modularity allows adaptability for any need.
No modifications to the press are required. Quad Stamp is made to
fit your press.
The new reduced thickness of the modules allows to save daylight.
Bigger dies can be used in smaller presses.
One operator, with no tools, can operate all the die-clamping
easily [...]

More specifications...

Virtual stand on

TECNOMAGNETE

Radial Magnetic chuck

Magnetic chuck

Lifting magnet

Machining center magnetic chuck

Electro-permanent lifting magnet< 25 t

Quick mold change system : Magnetic clamping system

Electro-permanent magnetic chuck

Permanent magnet magnetic chuck

Coil lifting magnet

Multi-coupling for quick production change

Magnetic lifter

Electro-permanent lifting magnet< 3 t

Tube lifting magnet

Quick mold change system : magnetic clamping system< 250 'C

Quick mold change system

Electro-permanent lifting magnet
< 25 t

Electro-permanent lifting magnet
< 3 t

Quick mold change system : magnetic clamping system
< 250 'C